Appendix 8 Parameter List; System Parameters - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 8
This section lists parameters.
For the parameters that are not described in this chapter, refer to the manuals for each module used.

System parameters

The following is the list of system parameters.
Item
I/O Assignment
Multiple CPU Setting
Inter-module Synchronization
Setting
APPX
732

Appendix 8 Parameter List

Parameter List
Base/Power/Extension Cable Setting
I/O Assignment Setting
Points Occupied by Empty Slot Batch Setting
Redundant Module Group Setting
Communication Setting between
CPUs
Fixed Scan Communication Setting
Operation Mode Setting
Other PLC Control Module Setting
Use Inter-module Synchronization Function in System
Select Synchronous Target Unit between Unit
Fixed Scan Interval Setting of Inter-module Synchronization
Inter-module Synchronous Master Setting
Slot
Base, Power Supply Module, Extension Cable
Points, Start XY, Module Status Setting
Control PLC Settings
Module Name
CPU Buffer Memory Setting (at refresh END)
CPU Buffer Memory Setting (at execution of refresh I45)
PLC Unit Data
Fixed Scan Communication Function
Fixed Scan Communication Area Setting
Fixed Scan Interval Setting of Fixed Scan Communication
Fixed Scan Communication Function and Inter-module
Synchronization Function
Stop Setting
Synchronous Startup Setting
I/O Setting Outside Group
Parameter No.
0201H
0203H
0200H
0202H
0203H
0100H
0400H
0304H
0308H
0309H

0307H
0306H
0306H
0302H
030AH
0305H

0101H
0101H
0102H