Configuration Procedure; Label Communication Data Storage Location And Operation At The Time Of Each Setting Operation; File Operation - Mitsubishi Electric MELSEC iQ-R Series User Manual

Configuration procedure

This section describes the configuration procedure to enable access by specifying the global label from external devices.
Operating procedure
"Global Label Setting" window
"Setting of File/Data Use or Not in Memory Card windows
Data storage to the data memory, not using the SD memory card, does not need the setting of procedure 3.
Label communication data storage location and operation at the
time of each setting operation
This section describes the storage location for label communication data and the accessibility according to the setting of
whether to use the file/data in a memory card.
: Access from external device possible (Communication memory indicated in parentheses) : Access from external device
not possible (Generates communication error)
Label communication data
storage location
Data Memory
SD memory card
Data memory and SD memory card
*1 An error occurs in the CPU module.

File operation

The label communication data can be written from an engineering tool. Reading and deleting
*1 Deleting an entire folder is possible.
28 LABELS
508
28.7 Label Access Setting from External Device
When "Enable" is set in the setting for the
usage status of the file/data in a memory
card
*1

 (SD memory card)
 (SD memory card)
1.
Set the label in "Global Label Setting" and
select the "Access from External Device"
checkbox.
2.
Check the capacity of the label
communication data.
3.
Enable "Data for Label Communication" to
use the label communication data stored in
the SD memory card (or store the label
communication data in the SD memory
card).
[Memory Card Parameters]  [Setting of
File/Data Use or Not in Memory Card] 
[Data for Label Communication]
4.
Write parameters, global label setting, and
global label assignment information files to
the CPU module.
When "Disable" is set in the setting for the
usage status of the file/data in a memory
card
 (Data memory)

 (Data memory)
*1
are not possible.