Mitsubishi Electric MELSEC iQ-R Series User Manual page 84

External Device Configuration
Set the method and protocol used for communicating with external devices.
■Setting method
The procedure for setting the external device to be connected is shown below.
1.
Select the external device to be connected in "Module List" and drag it to "List of devices" or "Device map area".
2.
Set the required items. (The required items vary depending on the selected external device.)
3.
Select [Close with Reflecting the Setting] to finish the external device configuration settings.
[Ethernet Configuration]  [Check]  [System Configuration]
8 PARAMETER SETTINGS
82
8.1 Parameter Settings for CC-Link IE TSN