Mitsubishi Electric MELSEC iQ-R Series User Manual page 302

4.
Click the [OK] button to add a module label of the CC-Link IE TSN Plus module.
5.
Set the items in "Basic Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]
6.
Set the "Refresh Setting" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]  [Refresh Settings]
7.
Click the [Apply] button.
8.
Set the EtherNet/IP communication parameters in "EtherNet/IP Configuration".
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Extended
Parameter]
13 PROGRAMMING
300
13.2 Class1 Communications Communication Example