Mitsubishi Electric MELSEC iQ-R Series User Manual page 263

Application type
Set control related to data communication.
The following table shows the support by Class1 communications for each application type.
• When the CC-Link IE TSN Plus module is an originator
: Requests can be sent to the EtherNet/IP device, : Requests cannot be sent to EtherNet/IP device, : No combination
Communication Connection settings
method
Application type
Class1 instance Exclusive Owner
communications
Input Only
Listen Only
Redundant Owner
Class1 tag Input Only
communications
*1 A method to send data when the status changes.
*2 A method for communicating with a fixed size.
*3 A method for communicating with a variable size.
*4 Connection requests can be set, but are sent from the CC-Link IE TSN Plus module with a fixed size (value set for Size).
*5 Among the real time formats (RTF) specified by EDS in which requests can be accepted by the external device, to request the zero-
length data format to the external device, it must be requested with Variable selected for the input type and output type.
To request the modeless format, 32-bit header format, or heartbeat to the external device, it must be requested with Fixed selected for
the input type and output type.
• When the CC-Link IE TSN Plus module is a target
: Requests can be accepted from the EtherNet/IP device, : Requests cannot be accepted from EtherNet/IP device, : No combination
Communication Connection settings
method
Application type
Class1 instance Exclusive Owner
communications
Input Only
Listen Only
Redundant Owner
Class1 tag Input Only
communications
*1 A method to send data when the status changes.
*2 A method for communicating with a fixed size.
*3 A method for communicating with a variable size.
*4 For real time formats (RTF) for the input type (target to originator), requests can be accepted in modeless format only. For real time
formats (RTF) for the output type (originator to target), requests can be accepted in heartbeat only.
Trigger type
Cyclic Application Change
Trigger of State
  
  
  
  
  
Trigger type
Cyclic Application Change
Trigger of State
  
  
  
  
  
Input type
(target to originator)
*2*5 *3*5
Fixed Variable
*1
 
 
 
 
 
Input type
(target to originator)
*2*4 *3*4
Fixed Variable
*1
 
 
 
 
 
12.2 Cyclic Transmission Function
Output type
(originator to target)
*2*5 *3*5
Fixed Variable
*4
 
 
 
 
 
Output type
(originator to target)
*2*4 *3*4
Fixed Variable
 
 
 
 
 
12 FUNCTIONS
261
12