Checking The Network Status - Mitsubishi Electric MELSEC iQ-R Series User Manual

Checking the network status

After starting up the system, check whether data link can be normally performed. Use the CC-Link IE TSN/CC-Link IE Field
diagnostics of the engineering tool to check the status.
1.
Connect the engineering tool to the CPU module on the master station.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics]  [CC-Link IE TSN/CC-Link IE Field Diagnostics]
If the following display appears, a data link is normal.
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
If an error icon appears in "Network Status" area, use the CC-Link IE TSN/CC-Link IE Field diagnostics to identify the cause of
the error and take corrective actions. ( Page 372 CC-Link IE TSN/CC-Link IE Field Diagnostics)
11.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
11 PROGRAMMING
241
11