Mitsubishi Electric MELSEC iQ-R Series User Manual page 313

Target 1-side program
Classification Label name
Module label GN11_SE_1.EIP.bSts_CommunicationDuringStartup
GN11_SE_1.EIP.bSts_CommunicationReady
GN11_SE_1.EIP.uSet_CommunicationStart_D
Labels to be Define global labels as shown below.
defined
FBs to be used • M+RJ71GN11_SE_EIP_Class1SetOutputData
(0) Set the processing for output data to connection No.1 and start EtherNet/IP communication.
(4) When M0 is on, "M+RJ71GN11_SE_EIP_Class1SetOutputData" is executed to set the connection No.2 output data.
When M20 is on, the output data set in D0 or later is sent to the originator according to the data size set for connection No.1.
(352) By turning on M200, output data setting and EtherNet/IP communication are stopped.
Description
EtherNet/IP communication in process
Communication Ready
EtherNet/IP communication start request
13.2 Class1 Communications Communication Example
Device
X10
X1F
U0\G7340096
13 PROGRAMMING
311
13