Mitsubishi Electric MELSEC iQ-R Series User Manual page 130

Module Configuration setting
Set the module for EtherNet/IP communications.
■Setting procedure
1.
Under "Chassis Type", select the chassis to be set. As the number of slots is indicated on the chassis, please select this
according to the number of modules to be added.
2.
Select the module to be added from "Module List" and drag it to the list of slots.
Slot list
Module list
3.
Check the system configuration.
[Module Configuration]  [Check]  [System Configuration]
4.
Select [Close with Reflecting the Setting] and close the "Module Configuration" window.
■Setting items
Item
Chassis Type
Number of Used Slots
Slot
Model Name
Number of Occupied Slots
Device Name
8 PARAMETER SETTINGS
128
8.2 EtherNet/IP Parameter Settings
Description
Changes the chassis type to be used for the module.
Displays the number of slots to be used for the module.
Displays the slot number of the module.
Displays the model name of the module.
Displays the number of occupied slots for the selected slot.
Enter the name of the device for the selected slot if required.
Setting range





Up to 32 characters (one-byte or two-
byte)
(Default: empty)