Details Of Buffer Memory Addresses - Mitsubishi Electric MELSEC iQ-R Series User Manual

Master/local module

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

Details of buffer memory addresses

Link device area

The RX, RY, RWw, RWr, LB, LW, SB, and SW values are stored.

■Remote input (RX) (Un\G57344 to Un\G58367)

The RX value is stored. The RX start number and number of points for each station number can be checked by the 'RX offset/

size information' (Un\G1245696 to Un\G1246179). ( Page 469 RX offset/size information)

Each bit corresponds to 1 bit of RX.

■Remote output (RY) (Un\G58368 to Un\G59391)

The RY value is stored. The RY start number and number of points for each station number can be checked by the 'RY offset/

size information' (Un\G1246720 to Un\G1247203). ( Page 470 RY offset/size information)

Each bit corresponds to 1 bit of RY.

■Remote register (RWw) (Un\G59392 to Un\G67583)

The RWw value is stored. The RWw start number and number of points for each station number can be checked by the 'RWw

offset/size information' (Un\G1247744 to Un\G1248227). ( Page 470 RWw offset/size information)

■Remote register (RWr) (Un\G67584 to Un\G75775)

The RWr value is stored. The RWr start number and number of points for each station number can be checked by the 'RWr

offset/size information' (Un\G1248768 to Un\G1249251). ( Page 470 RWr offset/size information)

Appendix 3 Buffer Memory

Melsec iq-r cc-link ie tsn plus