Receiving side
Connect the engineering tool to the CPU module on the receiving side and set the parameters.
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of when setting the sending side. ( Page 245 Sending side)
2.
Set the CC-Link IE TSN Plus module (RJ71GN11-EIP) as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add a module label of the CC-Link IE TSN Plus module. The module label addition method is the same as that of the
sending side. ( Page 245 Sending side)
4.
Set the items in "Basic Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Basic Settings]
11 PROGRAMMING
248
11.4 Example of Socket Communications