11.
Set the items in "Application Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Application Settings]
12.
Click the [Apply] button.
13.
Write the set parameters to the CPU module on the master station. Then, reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
Page 73 Parameter Settings for CC-Link IE TSN
Settings in the remote stations
Set the setting of the IP address set in "Network Configuration Settings" of the master station.
11 PROGRAMMING
238
11.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations