Program Example (At Multicast Mode) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Program example (at multicast mode)

This section describes a program example when "Communication Mode" under "Application Settings" is set to "Multicast".
Master station (station No.0)
Classification Label name
Module label RCPU.stSM.bAlways_ON
GN11_SE_1.bSts_DataLinkError
GN11_SE_1.bnSts_DataLinkError_Station[1]
GN11_SE_1.bnSts_DataLinkError_Station[2]
Label to be defined Define global labels as shown below:
(6) Communication program with a local station (station No.1)
(22)Communication program with a local station (station No.2)
Description
Always on
Data link error status of own station
Data link status of each station (station No.1)
Data link status of each station (station No.2)
11.2 Communication Example of the Master Station and Local Stations
Device
SM400
SB0049
SW00B0.0
SW00B0.1
11 PROGRAMMING
229
11