Settings in the local stations
Connect the engineering tool to the CPU module on the local station and set parameters.
Settings in the local station (station No.1)
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 219 Setting in the master station)
2.
Set a local station (RJ71GN11-T2) as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add a module label of the local station. The addition method of the module label is the same as that of the master station.
( Page 219 Setting in the master station)
4.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Required Settings]
11 PROGRAMMING
222
11.2 Communication Example of the Master Station and Local Stations