Details Of Buffer Memory Addresses - Mitsubishi Electric RD62P2E Application User's Manual

Details of buffer memory addresses

This section describes the I/O numbers (X/Y), buffer memory addresses, and external I/O terminals for CH1.
To check the I/O numbers (X/Y) for CH2, refer to the following.
Page 54 List of I/O signals
To check the buffer memory addresses for CH2, refer to the following.
Page 60 List of buffer memory addresses
CH1 Preset value setting
• A preset value is stored in this area.
• The setting range is between -2147483648 and 2147483647 (32-bit signed binary value).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory address name
CH Preset value setting
CH1 Present value
• The present counter value is stored in this area.
• The counting is reflected to this area without delay.
• The range of the stored value is between -2147483648 and 2147483647 (32-bit signed binary value).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory address name
CH Present value
CH1 Coincidence output point No.1 setting
• The setting value of the coincidence output point No.1 for comparison with the present counter value is stored in this area.
• The setting range is between -2147483648 and 2147483647 (32-bit signed binary value).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory address name
CH Coincidence output point No.1 setting
CH1 Coincidence output point No.2 setting
• The setting value of the coincidence output point No.2 for comparison with the present counter value is stored in this area.
• The setting range is between -2147483648 and 2147483647 (32-bit signed binary value).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory address name
CH Coincidence output point No.2 setting
APPENDICES
62
Appendix 3 Buffer Memory Areas
CH1
0 to 1
CH1
2 to 3
CH1
4 to 5
CH1
6 to 7
CH2
32 to 33
CH2
34 to 35
CH2
36 to 37
CH2
38 to 39