Checking the network status
Once parameters are set for the master station and local station, check whether data link between the master station and local
station is normally operating. For the check, use the CC-Link IE TSN/CC-Link IE Field diagnostics of the engineering tool.
1.
Connect the engineering tool to the CPU module on the master station.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics] [CC-Link IE TSN/CC-Link IE Field Diagnostics]
If the following display appears, data link is normal.
If an error icon appears in "Network Status" area, use the CC-Link IE TSN/CC-Link IE Field diagnostics to identify the cause of
the error and take corrective actions. ( MELSEC iQ-R CC-Link IE TSN User's Manual (Application))
7 COMMUNICATION EXAMPLES
7.1 System Configuration Example
7
45