Settings In The Local Stations - Mitsubishi Electric MELSEC iQ-R Series User Manual

Settings in the local stations

Connect the engineering tool to the CPU module on the local station and set parameters.
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 134 Setting in the master station)
2.
Set the RJ71GN11-T2 as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
3.
Set to use the RJ71GN11-T2 module label. The addition method of the module label is the same as that of the master
station. ( Page 134 Setting in the master station)
4.
Set the items in "Required Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-T2]  [Required Settings]
3.2 Communication Example with CC-Link IE TSN Class A Remote Station
3 PROGRAMMING
139
3