Station Status - Samsung OfficeServ 500 Programming Manual

[108] STATION STATUS

Displays the following attributes of a station port. This is a READ-ONLY MMC:
No
0 PORT NO
1 TYPE
2 PICKUP GROUP
3 SGR
4 BOSS-SECR
5 PAGE
6 COS 1, COS 2
9 TENANT GROUP
CONDITIONS
NONE
DEFAULT DATA
PORT #: FOLLOWS HARDWARE POSITION
TYPE: DEPENDENT ON CONNECTED PHONE
PICKUP GRP: NONE
SGR: NONE
BOSS-SECR: NONE
PAGE ZONE: NONE
COS NUMBER: 01 IN ALL RING PLANS
TENANT GRP: 1
ACTION
1) Press Transfer button and enter 108.
Display shows first station:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and
press Right Soft button to move cursor.
3) Dial 0~9 to select station status type.
OR
Press Volume button to select status and
press Right Soft button to return to step 2.
© SAMSUNG Electronics Co., Ltd.
Status
Cabinet(1~3)/Slot(1~9)/Port(1~16)
Phone Type
None, 01~99
Station Group Number
None, 1-4
None, Page Zone(0~4, * )
COS(1-30) per Ring Plan(01-06)
Tenant Group Number(1~2)
OfficeServ 500 Programming Guide
Description
DISPLAY
[201] STN STATUS
PORT:C1-S3-P01
[205] STN STATUS
PORT:C1-S3-P05
[205] STN STATUS
PICKUP GROUP:01
2-17