Samsung OfficeServ 500 Programming Manual page 414

CHAPTER 2. Ошибка! Стиль не определен.
No Parameter
09 MIN JITTER
10 MAX JITTER
11 FAX ECM
12 MAX FAX CNT
13 DTMF TYPE
14 TOS FIELD
15 FAX RETRY
16 RTP CHK TM
2-372
Description
Decides the minimum time to consider delay for jitter
adjustment.
The range is 010~300 ms
Decides the maximum time to consider delay for jitter
adjustment.
The range is 010-300 ms.
This option selects retry of Fax-over-IP, in the case that
errors are detected.
This is maximum number of channels that can be
simultaneously utilized for Fax-over-IP. The range is
00~16.
There are two types of DTMF transmission: INBAND,
which is industry standard(H.245) type DTMF transport,
and OUTBAND which is a Samsung proprietary
method.
An eight-bit binary value that will be utilized by external
routers, switches, etc(that optionally support TOS-bit
prioritization)-to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at default value(00000) if your network
infrastructure does not support this method of
bandwidth management.
This option selects retry count of Fax-over-IP, in the
case that errors are detected. The range is 0~4 and 0
means no retry.
This options selects the interval time of sending RTCP.
(Continued)
Default
30 ms
150 ms
ENABLE
2
OUTBAND
all bits 0
0
5 sec
© SAMSUNG Electronics Co., Ltd.