Assign R2 Call Type (China Only) - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

[610]ASSIGN R2 CALL TYPE (China Only)

In China, the R2MFC signaling is different from according to dialling digit. This MMC is

used to assign the call types for each dialling digit.

DEFAULT DATA

1) Press Transfer button and enter 610.

Display shows first station:

2) Dial code index number 1-100.(e.g., 005)

Press UP or DOWN key to selected index number and

press Right Soft button to move cursor.

3) Enter digit via dial keypad(maximum of four digits,

e.g.,002) and press Right Soft button to move cursor.

4) Enter call type.(1-6, e.g., 5)

Press UP or DOWN key to make selection and press

Right Soft button.

5) Press Transfer button and enter to save and exit.

Press Speaker button to save and advance to next MMC.

Table of Contents