Samsung OfficeServ 500 Programming Manual page 435

Register the WBS24 GATEWAY.
Displays the WBS24 MAC ADDRESS.
Displays the WBS24 VERSION.
Displays the WBS24 STATUS.
Register the WBS24 RF CHANNEL(The WBS RF
channel must be selected among the pre-
assigned RF channels in WLAN RF CHANNELS
item).
Register the WBS24 TX POWER.
(Default: LEVEL 1~4)
Used to clear the WBS parameter.
6) Set the items below at the menu.
Register the RE-TRANS T1.
The initial re-transmission time if no answer
based on the RFC2543 specification.
The range is 0-9900 ms. (Default: 500 ms)
Register the RE-TRANS T2.
The maximum re-transmission time if no answer
based on the RFC2543 specification.
The range is 0-9900 ms. (Default: 4000 ms)
Register the RE-TRANS T4. The time the User Agent
Server waits after receiving the ACK message.
Based on the RFC2543 specification.
The range is 0-9900 ms. (Default: 5000 ms)
Register the GEN LING TM. The server shall
retransmit the response during this amount of
time until the requested retransmission is received.
For example, the wait time after sending 200 OK for
INFO.
The range is 0-99900 ms. (Default: 6000 ms)
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
CWBS1: GATEWAY
0. 0. 0. 0
CWBS1 : MAC ADDR
FFFF FFFF FFFF
CWBS1 : VERSION
CWBS1 : STATUS
OFF
CWBS1 : RF CHAN
USE CH 1:01
CWBS1 : TX POWER
DEFAULT
CWBS1 : PARA CLR
ARE YOU SURE?NO
SIP : RE-TRANS T1
000500MS
SIP : RE-TRANS T2
004000MS
SIP : RE-TRANS T4
005000MS
SIP : GEN LING TM
006000MS
2-393