Station Cards - Samsung iDCS500 Manual

2-8 Chapter 2
Hardware Descriptions

STATION CARDS

DLI
This card is an eight circuit digital station interface card that provides 2B+D service when installed in
any universal card slot in all cabinets.
16DLI
This card is a sixteen circuit digital station interface card that provides 1B+D service when installed in
any universal card slot in all cabinets. Keyset daughter boards will not work when connected to this
card.
NOTE: The circuit on a FKDBS does not provide a disconnect signal or have the over-voltage
protection necessary for OPX operation.
SLI
This card is a four circuit analog station interface for industry standard single line telephones or other
analog peripheral devices (voice mail, etc.). Each circuit is equipped with an analog DTMF receiver
and provides the over-voltage protection required for connection to telephone company off premises
extension circuits (OPX). It can be inserted in any universal card slot in all cabinets. Each port on
this card is intended for connection to one telephone. Connecting multiple telephones to a port may
result in incorrect operation or damage to the card. See the installation manual Chapter 3 for details.
8SLI
This card is a eight circuit analog station interface for industry standard single line telephones or other
analog peripheral devices. The 8SLI does not contain any over-voltage protection and is not
qualified as OPX. It also does not contain DTMF receivers, but shares system DSP resources. It can
be inserted in any universal card slot in all cabinets. Each port on this card is intended for connection
to one telephone. Connecting multiple telephones to a port may result in incorrect operation or
damage to the card. See the installation manual Chapter 3 for details.
16SLI
This card is a sixteen circuit analog station interface for industry standard single line telephones or
other analog peripheral devices. The 16SLI does not contain any over-voltage protection and is not
qualified as OPX. It also does not contain DTMF receivers, but shares system DSP resources. It can
be inserted in any universal card slot in all cabinets. Each port on this card is intended for connection
to one telephone. Connecting multiple telephones to a port may result in incorrect operation or
damage to the card. See the installation manual Chapter 3 for details.
8MWSLI
This card is an eight circuit analog station interface for industry standard single line telephones that
require operation of an industry standard message waiting lamp with a voltage range of 85 ~ 96 VDC.
The lamp can be programmed to be on continuously or flash at a programmable rate of 100ms to
2000ms ON/OFF times. The 8MWSLI does not contain any over-voltage protection and is not
qualified as OPX. It also does not contain DTMF receivers, but instead shares the system DSP
resources. It can be inserted in any universal card slot in all cabinets. Each port on this card is
intended for connection to one telephone. Connecting multiple telephones to a port may result in
incorrect operation or damage to the card. See the installation manual Chapter 3 for details.