Executive State - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[125] EXECUTIVE STATE

Allows the system administrator or technician to set executive station's the following
options.
No Option
0 EXEC STATE
1 STATE(IN)
2 STATE(OUT)
3 ANSWER MODE
CONDITIONS
NONE
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
State display messages are written using the keypad. Each key press selects a character.
Pressing the dial pad key moves the cursor to the next position. For example, if the
message is 'CONFERENCE', press the number '2' three times to get the letter 'C'.
Now press the number '6' three times to get the letter 'O'. Continue selecting characters
from the table below to complete your message. Pressing the bottom left programmable
button will change the letter from upper case to lower case.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 125.
Display shows:
2) Dial executive station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
2-42
When inter-working with EASYSET, the state of executive station can
be displayed.
If EXEC STATE sets to OTHERS(IN), the EASYSET display this
message.
If EXEC STATE sets to OTHERS(OUT), the EASYSET display this
message.
When the secretary call by BOSS key, the executive station ringing or
automatically answer follows this option.
Description
DISPLAY
[201] EXEC STATE
IN THE ROOM
[205] EXEC STATE
IN THE ROOM
© SAMSUNG Electronics Co., Ltd.