Diagnostic Time - Samsung OfficeServ 500 Programming Manual

[854] DIAGNOSTIC TIME

Provides a means to set the Diagnostic Time. The system diagnostics tests include memory
audits, internal loopback tests on digital trunks, DSP, AA DSP tests. Additional tests
include CODEC tests on analog trunk and station cards and tone tests. If the diagnostics
cannot complete the tests because of system traffic, the system will abort the test and retry
during the next programmed diagnostic time. It is recommended to assign the diagnostic
time during non-peak traffic periods.
CONDITIONS
NONE
DEFAULT DATA
NO DIAGNOSTIC TIME SET
ACTION
1) Press Transfer button and enter 854.
Display shows:
2) Enter weekday number.
(0: Sun, 1: Mon, ..., 6: Sat)
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter military time hour via the dial pad.
Cursor will advance to next entry.
4) Enter military time minutes via the dial pad.
Data saved and cursor will advance to step 2.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 851
MMC 852
MMC 853
© SAMSUNG Electronics Co., Ltd.
ALARM REPORTING
ALARM KEY ASSIGNMENTS
MAINTENANCE BUSY
OfficeServ 500 Programming Guide
DISPLAY
DIAGNOSTIC TIME
SUN: :
DIAGNOSTIC TIME
SUN:_ :
DIAGNOSTIC TIME
SUN:23:_
DIAGNOSTIC TIME
SUN:23:30
2-413