Wake-Up Announcement - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[224] WAKE-UP ANNOUNCEMENT

This MMC is enhance Wake Up feature. The system will play a recorded message when a
Wake Up call is answered by the user. The Wake Up Announcement feature will require an
Automated Attendant(AA) card be installed in the system. When a Wake Up call is
answered, the system will access the customized Wake Up message(1-48) that has been
recorded in the AA card. The end user will record this message and have the ability to
change it when desired Auto Attendant operation. The Wake Up message will have no
default ROM message assigned to it. However a ROM message(49-64) may also be
assigned as the Wake Up message if desired.
This MMC has three options.
No
0 AA GROUP
1 MESSAGE NO
2 GROUP BUSY
CONDITIONS
NONE
DEFAULT DATA
AA GROUP: NONE
MESSAGE NO: NONE
GROUP BUSY: NONE
ACTION
1) Press Transfer button and enter 224.
Display shows:
2) Dial 0, 1 or 2 for option select.
OR
Press Volume button to select option and press
Right Soft button.
2-72
Option
Determines which AA group will be connected when a Wake Up
call is answered. This destination can be a any AA groups.
Determines which message will be played when a Wake Up call is
answered. This destination can be a custom recorded message
(1-48) or one of the pre-programmed messages(49-64).
Determines which tone source will be connected when a AA group
members are all busy. This destination can be a NONE, TONE or
extern music on hold.
If NONE set then dial tone connected, if TONE set then hold tone
connected.
Description
DISPLAY
WAKE-UP ANNOUNCE
AA GROUP :NONE
WAKE-UP ANNOUNCE
AA GROUP :NONE
© SAMSUNG Electronics Co., Ltd.