Samsung OfficeServ 500 Programming Manual page 193

Hide thumbs Also See for OfficeServ 500:

Table of Contents

1) Press Transfer button and enter 429.

Display shows:

2) Enter trunk number.(e.g., 704)

Press Volume button to scroll through ISDN

PORT and press Right Soft button to move cursor.

3) Enter the location 1-8.(e.g., 4)

Press Volume button to select location and press

Right Soft button to move cursor.

4) Enter digits to be translated(e.g., 4603881) via

dial keypad and press Right Soft button to move

to the destination selection.(Max. Digit is 12)

5) Enter destinations for 6 ring plan via dial

keypad.(e.g., 204 for ring plan 1)

Press Volume button to make selection and

press Right Soft button.

6) Enter 1 for YES or 0 for NO.

Press Volume button to make selection and

press Right Soft button.

7) Enter 1 for ACCEPT or 0 for REJECT.

Press Volume button to make selection and

press Right Soft button.

8) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.

Table of Contents