Smdr Options - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[725] SMDR OPTIONS

Allows the system administrator to select the information printed on the SMDR report. The
following options may be selected to print on SMDR:
No Option
00 PAGE HEADER
01 LINE PER PAGE
02 INCOMING CALL
03 OUTGOING CALL
04 AUTHORIZE
CODE
05 SMDR START
TIME
06 IN/OUT GROUP
07 DND CALL
08 WAKE-UP CALL
09 DIRECTORY
NAME
10 CALLER ID DATA
11 ABANDON CALL
13 NO. OF DIAL
MASK
2-262
Default
YES This option determines whether a page header will print
at the top of each page. This would normally be turned
off if SMDR is being sent to a Call Accounting machine.
60 This option selects the length of each page to determine
when to print the SMDR header. The number of lines
may be in the range 01-99.
NO This option determines whether incoming calls will print
on SMDR.
YES This option determines whether outgoing calls will print
on SMDR.
NO This option determines whether authorization codes will
print on SMDR. If this option is set to NO, system make
AUTH field to '****' on SMDR.
YES This option determines whether valid calls will include
the minimum call time in total call duration.
NO This option allows a message, IN GROUP or OUT
GROUP, to be printed in the digits dialed column each
time a station enters or leaves a group.
NO This option allows a message, IN DND or OUT DND, to
be printed in the digits dialed column each time a station
enters or leaves DND.
YES This option determines whether stations receiving an
alarm reminder call will print on SMDR.
NONE This option allows the system administrator to enter a
16 character name which will appear on the SMDR
header.
NO This option can be selected to print Caller ID data
received from the Central Office on incoming calls.
This option requires the use of a 132 column(wide carriage)
printer or an 80 column printer set for condensed print.
NO If this option is set to YES, unanswered calls for which
CID information was received will print on SMDR.
0 If this option is set to a numeric value, the selected last
digits of the number dialed field will be masked as
asterisks(*) on the SMDR print out. Maximum masked
digits is 18. First 4 digits will not mask.
Description
© SAMSUNG Electronics Co., Ltd.