Dect Clear Registration - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[741] DECT CLEAR REGISTRATION

Used for deleting previously registered information of DECT handsets.
This MMC has two modes:
Mode
FORCED When this mode is programmed, the system clears the registered information by
force.
NORMAL Whenever the system wants to clear the registration of a DECT handset, the
deletion must be confirmed from the handset. If the confirmation is successful, the
system clears the registered information.(If the confirmation fails, the system
cannot clear the information)
CONDITIONS
NONE
DEFAULT DATA
FORCED MODE
ACTION
1) Press Transfer button and enter 741.
Display shows:
2) Enter DECT terminal number via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button.
3) Enter 0 for FORCED mode or 1 for NORMAL
mode.
OR
Press Volume button to make selection and press
Right Soft button.
4) Enter 1 for YES or 0 for NO.
OR
Press Volume button to make selection and press
Right Soft button.
2-288
Description
DISPLAY
[8801]DECT CLEAR
MODE:FORCED
[8801]DECT CLEAR
MODE:FORCED
[8801]DECT CLEAR
MODE:NORMAL
[8801]DECT CLEAR
DECT CLEAR :NO
© SAMSUNG Electronics Co., Ltd.