Assign Network Trunk - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

CHAPTER 2. Ошибка! Стиль не определен.

[821] ASSIGN NETWORK TRUNK

Assigns the Q-signaling PRI trunk for networking. It is assigned data on a per-TEPRI card

DEFAULT DATA

1) Press Transfer button and enter 821.

Display shows:

2) Enter first trunk number of PRI card.

Press Volume button to make selection and

press Right Soft button to move cursor.

3) Enter 0 for NORMAL, or 1 for Q-SIGNALING.

Press Volume button to make selection and

press Right Soft button to save and move cursor.

4) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.

Table of Contents