System-Wide Counters - Samsung OfficeServ 500 Programming Manual

[500] SYSTEM-WIDE COUNTERS

Used to set the values of the system counters. The counters are listed below with a brief
description of each.
No Counter
0 ALARM REM.
CNTER
1 AUTO RDL
COUNTER
2 DISA CALL CNTER
3 DISA LOCK CNTER
4 NEW CALL
COUNTER
5 UCDS VISUAL
ALARM
6 UCDS AUDIO ALARM
7 UCD CS LEVEL 1
8 UCD CS LEVEL 2
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
© SAMSUNG Electronics Co., Ltd.
Default
5 The number of times that an alarm reminder will
ring a station before cancelling. RANGE = 1-99.
3 The number of times the system will redial an
outside number after the auto redial feature has
been activated. RANGE = 1-99.
99 Sets the maximum number of intercom calls that
can be made after accessing a DISA line.
RANGE = 1-99.
3 Number of attempts the system will allow to
incorrectly access a DISA line before locking out
the DISA line. RANGE = -99
99 Number of times the system will allow a user to
signal New Call on a Trunk line during one call.
RANGE = 1-99.
0 Used to set the Visual alarm threshold. It is
triggered when the number of calls waiting to be
answered in the UCD group reaches this value.
RANGE = 0-25.
0 Used to set the Audio alarm threshold. It is
triggered when the number of calls waiting to be
answered in the UCD group reaches this value.
RANGE = 0-25.
0 Provides call wait indication level 1 if number of
calls waiting to be answered in UCD group reaches
this value. RANGE = 0-25.
0 Provides call wait indication level 2 if number of
calls waiting to be answered in UCD group reaches
this value. RANGE = 0-25.
OfficeServ 500 Programming Guide
Description
2-159