System Speed Dial By Name - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[706] SYSTEM SPEED DIAL BY NAME

Allows an 11-character name to be entered for each system speed dial location.
This name enables the speed dial number to be located when using the directory dial
feature. The directory dial feature allows the display phone user to select a speed dial
location by scanning its name.
CONDITIONS
NONE
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
NO NAMES
PROGRAM BUTTONS
ANS/RLS
ACTION
1) Press Transfer button and enter 706.
Display shows:
2) Dial system speed entry number.(e.g., 505)
OR
Press Volume button to select entry number and
press Right Soft button to move cursor.
3) Enter name using dial keypad and above table and
press Right Soft button to return to step 2.
OR
Press the F key to toggle to speed dial number
to return to MMC 705, step 3.
4) If you want to save the speed dial number and name
data to the MMC 728 CLI translation table.
Press ANS/RLS button and dial 1 for YES.
(The speed dial number must be exist)
2-226
Used to save the speed dial number and name to the MMC 728 CID
translation table.
DISPLAY
SYS SPEED NAME
500:
SYS SPEED NAME
505:
SYS SPEED NAME
505:TELECOMS
SYS SPEED DIAL
505:
SYS SPEED NAME
ADD CLI XLT ?NO
© SAMSUNG Electronics Co., Ltd.