Assign Speed Block - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:
Table of Contents

Advertisement

CHAPTER 2. Ошибка! Стиль не определен.

[606] ASSIGN SPEED BLOCK

Provides a means of adding or deleting speed dial blocks to the system or an individual
phone. With the ability to delete a block or blocks of speed dial, it will not be necessary to
waste these on such items as voice mail, DPIMs or stations that do not require the ability to
use speed dial. The Free List will show how many bins are left to be assigned.
A library of up to 2500 speed dial numbers may be allocated as needed. The system list can
have up to 500 numbers(950 numbers when MMC 861 SYSTEM SPEED BIN is set to
MAX 950) and each station can have up to 50 numbers. Speed dial numbers are assigned in
blocks of ten. Each speed number may contain up to 24 digits.
CONDITIONS
NONE
DEFAULT DATA
SYSTEM: 200 ENTRIES
STATIONS: 1 BLOCKS ASSIGNED
ACTION
1) Press Transfer button and enter 606.
Display shows:
2) Press Right Soft button to advance next line.
OR
You can view BUSY LIST using Volume button.
3) Make a selection of SYSTEM or EXT using Volume
button and press Right Soft button to advance cursor.
4) Enter desired extension number via dial keypad.
(e.g., 205)
OR
Press Volume button to make selection and press
Right Soft button to advance cursor.
5) Enter valid number for bins.
(e.g., 0-5 for EXT or 00-50 for SYSTEM)
OR
Press Volume button to make selection.
OR
Press Hold button to delete bin(s).
2-198
DISPLAY
FREE LIST:20
SYSTEM:20
FREE LIST:20
SYSTEM:20
BUSY LIST:180
SYSTEM:20
FREE LIST:20
EXT201:1
FREE LIST:20
EXT205:1
FREE LIST:20
EXT205:5
© SAMSUNG Electronics Co., Ltd.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents