Voip Ip Table - Samsung OfficeServ 500 Programming Manual

[833] VoIP IP TABLE

This MMC provides the IP addresses in tables pointed to by the VoIP code entry(MMC832).
There are 63 tables with up to 16 entries each. The destination IP address is required to
route dialed digits based on the access code and digits dialed. The IP entry field is divided
into 4 sections allowing modification of separate IP address fields.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010
CONDITIONS
NONE
DEFAULT DATA
TB(00) ENTRY(00): MMC830 SYSTEM IP ADDR
ALL OTHERS: EMPTY
ACTION
1) Press Transfer button and enter 833.
Display shows the first table number.
2) Enter table number(00-62) via dial keypad.
OR
Press Volume button to make select ion and
press Right Soft button to move cursor.
3) Enter entry number(00-15) via dial keypad.
OR
Press Volume button to make select ion and
press Right Soft button to move cursor.
4) Enter IP address via dial keypad.
Cursor will be return step 3.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC entry.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
TB(00) ENTRY (00)
0. 0. 0. 0
TB(00) ENTRY (00)
0. 0. 0. 0
TB(00) ENTRY (00)
0. 0. 0. 0
TB(00) ENTRY (00)
165.213. 87.110
2-367