Msg Waiting Lamp Cadence - Samsung OfficeServ 500 Programming Manual

[511] MSG WAITING LAMP CADENCE

This MMC defines the cadence(flash rate) of single line telephone message waiting lamps
on phones connected to an MWSLI supported card. There are two main choices for the
MW lamp cadence available, these being continuous and interrupted as described below.
No Item
0 INTERRUPTED
1 CONTINUOUS
CONDITIONS
MWSLI SUPPORTED CARDS ONLY
DEFAULT DATA
INTERRUPT LED: 1000MS-ON 1000MS-OFF
ACTION
1) Press Transfer button and enter 511.
Display shows:
2) Press 0 or 1 to select CADENCE.
OR
Press Volume button to make selection.
Press Right Soft button to advance step 3.
3) Dial new values for interrupt times.(four digits)
Press Right Soft button to move cursor back.
If valid entry, system returns to step 2.
Press Left Soft button to move cursor back.
If valid entry, system returns to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
The MW lamp will flash at a rate determined by the timer settings.
The shortest on time is 100 ms and the longest on time is 3000 ms.
The timer is adjusted in 100 ms increments.
When an MWSLI port has a message, the lamp will be lit steady.
OfficeServ 500 Programming Guide
Description
DISPLAY
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
2000 2000
2-183