Wlan Reset And Status Check - Samsung OfficeServ 500 Programming Manual

Hide thumbs Also See for OfficeServ 500:

Table of Contents

[847] WLAN RESET AND STATUS CHECK

This MMC is used for rebooting the WBS24 all or independently. This MMC is also used

for initializing the WLI card.

DEFAULT DATA

1) Press Transfer button, and enter 847.

2) Select the item number.(0: RESET, 1: STATUS)

Press Volume button to select item number and

press Right Soft button to move cursor.

3) Select the card type.(WLI or WBS)

4) Select the card number. If you press [ANS/RLS]

button, all WLI(or All WBS) will be selected.

5) Press Soft button, or press [1] to select YES,

and the WBS will be initialized.

6) To verify the STATUS of WLI or WBS, select 1

Table of Contents