Trunk Ring Assignment - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[406] TRUNK RING ASSIGNMENT

Enables ringing to a specific station or to a group of stations when incoming calls are
received. This MMC controls ring plan destinations for ring down trunks. If the ring plan
destinations are not input the default ring plan is ring plan 1. Station group 500 is default in
Ring Plan 1.
CONDITIONS
NONE
DEFAULT DATA
ALL TRUNKS RING DEFAULT OPERATOR GROUP
ACTION
1) Press Transfer button and enter 406.
Display shows:
2) Dial trunk number.(e.g., 704)
OR
Use Volume button to scroll through trunk numbers
and press Right Soft button to move the cursor.
OR
Press ANS/RLS button for all.
3) Dial ring plan number or press Right Soft button to
move the next step.
4) Dial station number or station group number.
(e.g., 205)
OR
Press Volume button to make selection and
press Right Soft button to move cursor to the
next ring plan destination and repeat step 5.
OR
Press Left Soft button to return to step 5.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 202
MMC 507
MMC 601
2-114
CHANGE FEATURE PASSCODES
ASSIGN RING PLAN TIME
ASSIGN STATION GROUP
DISPLAY
[701] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
[All] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
[704] TRK RING
1:205 2:500
[704] TRK RING
1:205 2:501
© SAMSUNG Electronics Co., Ltd.