Chapter 1. Overview Of Mmc Programming; Introduction To Programming - Samsung OfficeServ 500 Programming Manual

CHAPTER 1.
Programming
In this chapter, the things to know before you start MMC programming, and the phone
buttons and cautions will be discussed.

1.1 Introduction to Programming

The MMC program means the changes on the data that is used for the system operation
program. There are 3 levels of MMC programming, such as technician, operator, and
station levels. According to the programming level, the station can program or cannot
program the data change. The technician level programming and the operator level
programming require a passcode for each level while the station level programming does
not require a passcode.
Program List by User's Level
For information about the programming level classified by user's level, refer to
'1.4 Program List by User's Level' of this chapter.
© SAMSUNG Electronics Co., Ltd.
Overview Of MMC
OfficeServ 500 Programming Guide
1-1