Customer Database Copy - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[815] CUSTOMER DATABASE COPY

Provides a means to copy the customer database to the SMDB(Smart Media card Data
Base). This enables the on board database(SRAM) to be copied to the SMDB and also
allows the SMDB database to be copied to the on board database. A daily save can be
programmed to automatically save the on board data base to the SMDB. This insures that
an up to date database is always available in the case of a catastrophic failure. A daily save
time of 00:00 means there is no save performed.
It is recommended to CLEAR the SMDB before the SRAM is copied to it. When the
SRAM is copied to the SMDB there is no interruption in service. If the SMDB is copied to
the SRAM the system will reset to accept the new data.
Option
SMDB
SRAM
S:mm/dd/yy hh:mm
DAILY SAVE hh:mm
A Smart Media Card of 16 MB or 32 MB
A Smart Media Card of 16 MB or 32 MB must be installed in order to copy the on
board database(SRAM) on to the Smart Media card(SMDB).
CONDITIONS
NONE
DEFAULT DATA
DAILY SAVE 00:00(no daily save)
2-340
Smart Media card database
MCP2 On-Board database
Indicates the time the database was saved to the SMDB or the time the
SRAM was last saved
The time the SRAM will be saved to the SMDB
Description
© SAMSUNG Electronics Co., Ltd.