Set Answer Mode - Samsung OfficeServ 500 Programming Manual

[103] SET ANSWER MODE

Allows the system administrator to change the answer mode of any phone.
Each phone can have its answer mode set to one of the following options:
No
0 RING MODE
1 AUTO ANSWER MODE
2 VOICE ANNOUNCE
CONDITIONS
Since the DS-12B digital phone is not equipped with a microphone, the phone operates in
voice announcement mode when a call arrives while set to auto answer mode. Users must
use the handset to reply to the caller.
DEFAULT DATA
ALL PHONES: RING
ACTION
1) Press Transfer button and enter 103.
Display shows:
2) Dial phone number.(e.g., 205)
OR
Press Volume button to select phone and
press Right Soft button to move cursor.
OR
Press ANS/RLS button to select all.
3) Dial 0, 1 or 2 to change ring mode.
OR
Press Volume button to select ring mode and
press Right Soft button to return to step 2 above.
© SAMSUNG Electronics Co., Ltd.
Type
The phone will ring in one of eight custom ring patterns. Calls
are answered by pressing the ANS/RLS Button or by lifting
the handset.
After giving a short attention tone, the phone will
automatically answer calls on the speakerphone. When a
Trunk line is transferred to a phone in Auto Answer, the
screened portion of the call will be Auto Answer, but the
phone will ring when the transfer is complete if you have not
pressed the ANS/RLS Button or lifted the handset.
The phone will not ring. After a short attention tone, callers
can make an announcement but the ANS/RLS Button or
handset must be used to answer calls.
OfficeServ 500 Programming Guide
Description
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE
2-7