Rate Calculation Table - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[749] RATE CALCULATION TABLE

The RATE CALCULATION TABLE is used to define the billing charges for each COST
RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan.
There are eight call costing rates. Each rate has the following data fields.
No Type
0 FIRST INTERVAL
DURATION
1 FIRST INTERVAL
COST
2 SECOND INTERVAL
DURATION
3 SECOND INTERVAL
COST
4 SURCHARGE
CONDITIONS
NONE
DEFAULT DATA
ALL COST RATES NO DATA
ACTION
1) Press Transfer button and enter 749.
Display shows.
2) Dial COST RATE number.(1-8, e.g., 3)
OR
Press Volume button to select COST RATE and
press Right Soft button to move cursor.
3) Dial option number.(0-4, e.g., 1)
OR
Press Volume button to select option and press
Right Soft button to move cursor.
2-298
This is the amount of time at the beginning of each call to which a
fixed cost is applied. The range is from 0 to 999 seconds, for
example, 180 seconds(three minutes).
This is the dollar cost for the first interval duration.
The range is from 0 to 999, for example, 345($3.45).
This is the amount of time for the duration of each billing increment
after the first interval has expired. The range is from 0 to 999
seconds, for example, 006 seconds(six seconds).
This is the dollar cost for each billing increment. The range is from
0 to 999, for example 100($1.00).
This is a one-time charge that is applied to the call over and above
the time charges. The range is from 0 to 999, for example
150($1.50).
Description
DISPLAY
COST RATE (1)
1ST DUR :000 SEC
COST RATE (3)
1ST DUR :000 SEC
COST RATE (3)
1ST COST:000
© SAMSUNG Electronics Co., Ltd.