Tax Rate Setup - Samsung OfficeServ 500 Programming Manual

[761] TAX RATE SETUP

This MMC allows the technician to set up the 8 tax rates used in MMC 760. Each tax rate
may be defined as a fixed value or as a percentage of the item cost. In addition a 10
character name may be used to define the reason for the tax. The Various options are
further detailed below.
Option
TAX RATE This is the number assigned to this tax rate. The tax rates are numbered 1 to 8 to
match the rate field in MMC 760 counting from left to right.
TYPE This is the type of tax and defines if the VALUE is applied as a percentage(%) of
the cost of an item or is added as a fixed dollar value($) to an item or is applied as
a Inclusive VAT percentage(I) of the cost of an item.
VALUE This is the actual tax rate that will be applied to the item cost.
NAME This is a 10 character name that will be displayed on the room bill alongside the tax.
CONDITIONS
This function can be used only when the hotel function is enabled at 'MMC 813 HOTEL
OPERATION'
.
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
All rates are %
ACTION
1) Press Transfer button and enter 761.
Display shows:
2) Enter valid tax number, e.g., 2 via dial button pad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Dial 0 for '%', 1 for 'C' or 2 for 'I'.
(Inclusive VAT)
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
Description
DISPLAY
TAX RATE
TYPE:% VAL:00.00
TAX RATE
TYPE:% VAL:00.00
TAX RATE
TYPE:C VAL:00.00
(1)
(2)
(2)
2-317