Samsung OfficeServ 500 Programming Manual page 164

CHAPTER 2. Ошибка! Стиль не определен.
CONDITIONS
An E1 card must be installed in the OfficeServ 500 system. Otherwise, the 'NO E1
TRUNK CARD' message is displayed.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 411.
Display shows:
2) Enter desired trunk number.(e.g., 705)
OR
Press Volume button to make selection.
Press Right Soft button to move cursor.
OR
Press ANS/RLS button to select all trunks.
3) Press Volume button to trunk type select and
press Right Soft button to move cursor.
4) Press Volume button to signaling select and
press Right Soft button to move cursor.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
TRUNK PROGRAMMING
MMC 400
MMC 401
MMC 402
MMC 403
MMC 404
MMC 405
MMC 406
MMC 407
MMC 408
MMC 409
MMC 410
2-122
CUSTOMER ON/OFF PER TRUNK
TRUNK LINE/PBX LINE
TRUNK DIAL TYPE
TRUNK TOLL CLASS
TRUNK NAME
TRUNK CO TEL NUMBER
TRUNK RING ASSIGNMENT
FORCED TRUNK RELEASE
ASSIGN TRUNK MOH SOURCE
TRUNK STATUS READ
ASSIGN DISA TRUNK
DISPLAY
[701] E1 SIGNAL
UNUSE
[705] E1 SIGNAL
UNUSE
[ALL] E1 SIGNAL
?
[705] E1 SIGNAL
E&M:IMMEDIATE
[705] E1 SIGNAL
E&M:ITU_WINK
© SAMSUNG Electronics Co., Ltd.