Dial Numbering Plan - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[724] DIAL NUMBERING PLAN

This MMC allows the technician to change directory numbers for stations, trunks, station
groups, trunk groups and feature access codes. The system can be pre-programmed with a
default three or four digit numbering for station, station groups and trunk numbers
depending on the position of the DIP switches on the MCP2 card. There is an error
message provided to prevent the accidental duplication of a directory number or feature
access code.
No Type of Dial No
00 STN DIAL NO.
01 TRK DIAL NO.
02 AA/VD DIAL NO
03 MISC DIAL NO.
04 STNG DIAL
NUMBER
05 TRKG DIAL
NUMBER
06 FEAT DIAL NUMBER
07 S0 STN DIAL NO.
08 DECT STN DIAL NO
09 NTWK LCR DIAL NO
2-256
This is where station directory numbers are changed or assigned.
Default: 201-2xx, 3xx(last 319) or 2001-2xxx
This is where trunk directory numbers are changed or assigned.
Default: 701-7xx or 7001-7xxx
This is where AA port or Voice Dial port directory numbers are
changed or assigned.
Default: AA ports: 3951-39xx
VD ports: 3981-398x
This is where directory numbers for relays, MOH ports and the
alarm sensor are changed or assigned.
Default: Internal CHIME: 371
Internal MODEM: 3999
External MOH: 372-377
External PAGE & Relay: 361-369
Common Bell Relay: 3991-3993
Loud Bell Relay: 3995-3997
This is where station group numbers are changed or assigned.
Default: 500-5xx or 5001-5xxx
This is where trunk group numbers are changed or assigned.
Default: The first is 9 or 0, 800-828
This is where feature access codes are changed or assigned.
Dialling codes are entered via the dial pad key by pressing the dial
pad number the required steps to select the feature. For example,
for OHVA, the number 6 would be pressed three times.
NOTE) Please remember that this program is system-wide.
This is where directory numbers for BRI station ports mapping
terminal number.
Default: 8701-8748
This is where directory numbers for DECT terminals.
Default: 8801-8899
This is where additional LCR access codes are entered in the case
when two or more OfficeServ 500 system are networked together.
Default: NONE
Description
© SAMSUNG Electronics Co., Ltd.