Assign System Link Id - Samsung OfficeServ 500 Programming Manual

[820] ASSIGN SYSTEM LINK ID

This MMC is used to assign the system link ID for PRI and VoIP networking.
Up to 50 link Ids can be entered including SELF ID. In addition each Link ID is also
associated with the IP address of the MCP2 card for that system and IP address type.
Option
LINK ID
SIGNAL G/W
IP TYPE
CONDITIONS
'SELF' represents self-node, and must be set to use the networking function. Items other
than 'SELF' are used for station numbers and can be omitted.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 820.
Display shows:
2) Enter SELF link ID via dial keypad and
press Right Soft button.
3) Press Volume button to select other link ID
and press Right Soft button to mover cursor.
4) Enter other link ID via dial keypad and
press Right Soft button.
5) Press Transfer button and enter button to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 821
MMC 823
MMC 824
MMC 830
© SAMSUNG Electronics Co., Ltd.
System ID for networking feature.
System IP address for VoIP networking
System IP address type for VoIP networking. SELF system IP address type
determines 'SYSTEM IP TYPE' on MMC 830.
ASSIGN NETWORK TRUNK
ASSIGN NETWORK COS
ASSIGN NETWORK DIAL TRANSLATION
ETHERNET PARAMETER
OfficeServ 500 Programming Guide
Description
DISPLAY
SELF :LINK ID
SELF :LINK ID
11
SYS01:LINK ID
SYS01:LINK ID
22
2-347