Msn Digit - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[429] MSN DIGIT

Provides a method of assigning an incoming MSN call to a specific station. If any entry in
MSN DIGIT TABLE matches an incoming call's called party number,
either the specific station is alerted, if it is programmed to accept the call, or the call is
cleared if it is programmed to reject the call.
If the incoming called party number does not have a matching entry in the MSN table,
MMC 406 ringing destination is alerted or the call is released by option.
You can give each MSN number to a specific station and you can select call waiting option:
when a destination is busy, the incoming call must be cleared or camped-on to the
station(which is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the following fields:
Field
DIGIT Digits to be received. There is a maximum of 12 digits
RING 1-6 These numbers correspond to the six ring plan destinations for this MSN.
The destinations can be either stations or station groups.
CALL WAIT Toggles YES or NO: if YES then the call will be camped-on at busy destination
while NO gives busy indication.
OPTION if Accept then the selected destination party will be alerted. If Reject then the call
will be cleared.
CONDITIONS
A BRI card must be installed in the system. Otherwise, the 'NO BRI CARD' message
is displayed.
For each BRI access, two adjacent ports are assigned. You need only change the value
for one of the two ports; the value for the other port will be changed automatically.
DEFAULT DATA
NONE
2-150
Description
© SAMSUNG Electronics Co., Ltd.