Tone Cadence - Samsung OfficeServ 500 Programming Manual

[506] TONE CADENCE

Provides the ability to customize the tone cadence on a system-wide basis.
The system can provide eleven types of tone and three types of tones provided from
Central Office or PBX system can be detected. Please call Technical Support before
changing any cadences as some systems may require default settings.
No Item
00 BUSY TONE
01 CONFM/BARGE
02 DIAL TONE
03 DND/NO MORE
04 ERROR TONE
05 HOLD/CAMPON
06 MSGWAT TONE
07 RGBACK TONE
08 RING TONE
09 TRANSFERER
TONE
10 DID RNGBACK
11 CO BUSY TONE
12 CO RINGBACK
13 CO DIAL
CONDITIONS
NONE
DEFAULT DATA
TONE
BUSY TONE
CONFIRM/BARGE-IN
DIAL TONE
© SAMSUNG Electronics Co., Ltd.
The called station is busy.
A feature has been successfully activated/cleared or a Barge In with
Tone has been performed.
The system is ready to interpret key presses/dialed digits.
The called station is in DND or has no free CALL buttons.
An error has been made.
This is the system generated hold tone.
This is the tone heard at an SLT with a message waiting.
The called station is ringing.
This is the tone heard from ROP device or Loud Bell when these
devices are called.
This is the tone heard when the transfer button is pressed or an SLT
hook flashes.
This is the tone heard by the outside party when they dial a DID number.
This is used to detect the busy tone provided from Central Office or PBX
system.
This is used to detect the ring back tone provided from Central Office or
PBX system.
This is used to detect the dial tone provided from Central Office or PBX
system.
ON OFF
500 500
200 200
CONTINUOUS -
OfficeServ 500 Programming Guide
Description
(a unit: milliseconds)
ON
500
200
-
(a unit: milliseconds)
OFF
500
5000
-
2-175