System Options - Samsung OfficeServ 500 Programming Manual

[861] SYSTEM OPTIONS

This MMC is set to system miscellaneous options.
No Option
0 AUTO UPDATE TIME
1 SYSTEM SPPED BIN
2 IDLE WHEN
ENBLOCK
3 2 LINE ENBLOCK
4 2 ZONE EXT PAGE
5 USE LB FOR PAGE
6 LP TRK TONE DISC
7 USE WLAN
FEATURE
9 ISDN SS FEATURE
CONDITIONS
NONE
DEFAULT DATA
AUTO UPDATE TIME: DISABLE
SYSTEM SPEED BIN: MAX 500
IDLE WHEN ENBLOCK: DISABLE
2 LINE ENBLOCK: DISABLE
2 ZONE EXT PAGE: DISABLE
USE LB FOR PAGE: MISC1[NONE]:LB
LP TRK TONE DISC: DISABLE
USE WLAN FEATUE: DISABLE(Only below v2.40)
ISDN SS FEATURE: DISABLE
© SAMSUNG Electronics Co., Ltd.
Description
Sets enable(1) or disable(0) the system automatically time and
date update form ISDN call connection message. If sets enable,
when system receives ISDN call connection message, system
checks valid data of encapsulated time and date, and update
system time and date device.
Sets max 500(0) or max 950(1) the maximum number of system
speed dial bin. If sets 500 then same in previous system.
If sets 950, can assign system speed dial block is up to 950 bins
and speed dial bin numbers always 3 digits(000 to 999).
Even if station speed dial bin numbers are 3 digits(000 to 049).
Decides the state of Large LCD phone treated as idle or busy
when the user of Large LCD phone is dialling in ENBLOCK mode.
Decides the usage of ENBLOCK mode for 2 line LCD phone with
navigation buttons
Decides whether 2 Zone external paging is enable or not.
Decides whether LB port of MISC card used as ROP port or not.
When this option is set to ON, loop trunk can be disconnected by
detecting busy tone.
Before V2.40, this option must be set to enable to see a WLAN
related MMC. After V2.40, all WLAN related MMC is seen by
default.
Decides whether ISDN SS(Supplement Service) used or not.
OfficeServ 500 Programming Guide
2-421