Wlan Configuration - Samsung OfficeServ 500 Programming Manual

[849] WLAN CONFIGURATION

This MMC is used to set the WLAN configuration.
Parameter
REGISTER VoWLAN
WIP REGIST CLEAR
WBS WEP SERVICE
WEP KEY
STATIC WBS IP
STATIC WIP IP
SELECT AP TYPE
CONDITIONS
NONE
DEFAULT DATA
REGISTER VoWLAN: DISABLE
WIP REGIST CLEAR: DISABLE
WBS WEP SERVICE: DISABLE
WEP KEY: None
STATIC WBS IP: DISABLE
STATIC WIP IP: DISABLE
SELECT AP TYPE: BASIC AP(DEPEND ON COUNTRY)
ACTION
1) Press Transfer button, and press 849.
2) Enter the PASSCODE to activate the register.
(This PASSCODE is assigned in MMC 202
WLAN REGST)
3) Select ENABLE to register the terminal to the
REGISTER WLAN.
© SAMSUNG Electronics Co., Ltd.
Enable or disable the register of new WIP-500M mobile phone.
Used to clear the registration of WIP. The FORCED mode clearing is used
when the device is not connected normally(ex: device broken) and the
NORMAL mode clearing can be used in normal cases.
Enable or disable the WEP(Wired Equivalent Privacy) feature
Assign the WEP key(13 characters only)
Select the use of Static WBS IP
Select the use of Static WIP IP
Select the AP type of the system.
used in simultaneously. After change the AP type, the system must
be restarted.
OfficeServ 500 Programming Guide
Description
Combo AP and Basic AP cannot be
DISPLAY
ENTER PASSWORD
_
ENTER PASSCODE
****
REGISTER VoWLAN
DISABLE
2-399