Samsung OfficeServ 500 Programming Manual page 442

CHAPTER 2. Ошибка! Стиль не определен.
4) Select the WIP REGIST CLEAR to clear the register
status for each terminal.
5) Select the WEP KEY setting when ENCRYPTION is
selected.
6) Enter WEP KEY values when the WBS WEP
SERVICE is enabled.(13 characters only)
7) Select ENABLE to use the static WBS IP.
8) Select ENABLE to use the static WIP IP.
9) Select AP TYPE of the system. If you change the AP
type, the system must be restarted.
RELATED ITEMS
MMC 846
MMC 847
MMC 848
2-400
WIP INFORMATION
WLAN RESET AND STATUS CHECK
WLAN IP/MAC LIST
WIP REGIST CLEAR
3301:FORCED
WBS WEP SERVICE
DISABLE
WEP KEY
STATIC WBS IP
DISABLE
STATIC WIP IP
DISABLE
SELECT AP TYPE
COMBO AP
SELECT AP TYPE
RESET SYSTEM?NO
© SAMSUNG Electronics Co., Ltd.