Samsung OfficeServ 500 Programming Manual page 305

No Option
15 INCOMING
ANSWER
16 INTERCOM CALL
17 KEY MMC IN/OUT
20 HOTEL PAGE
FEED
21 HOTEL START
LINE
23 DID NUM/NAME
24 ITP
REGISTRATION
25 SET
RELOCATION
CONDITIONS
NONE
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS ARE DEPEND ON COUNTRY
© SAMSUNG Electronics Co., Ltd.
Default
NO If this option is set to YES, the duration of calls ringing
before answered will print on SMDR.
NO This option determines whether intercom calls will print
on SMDR.
NO If set to YES then the SMDR record will show
programming being opened and closed in MMC 200 and
MMC 800.
END This option determines where the page feed is inserted
on HM REPT.(Hotel/Model Enabled Only)
0 This option determines that the number of empty lines per
each page on HM REPT.(Hotel/Model Enabled Only)
YES If this option is set to YES, received DID information will
print on SMDR.
NO If set to YES then the SMDR record will show IP-based
station to system connect and disconnect.
NO If set to YES then the SMDR record will show set
relocated information.
OfficeServ 500 Programming Guide
(Continued)
Description
2-263