Table of Contents
Advertisement
PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 708
Display shows
2. Dial the account code entry (e.g., 005)
OR press UP or DOWN to select the
entry number and press the right soft
key to move the cursor
3. Enter the account code via the dial pad,
e.g., 1234 (maximum of 12 digits) and
press the right soft key to move the
cursor back to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
28
DISPLAY
ACCOUNT CODE
(001)
ACCOUNT CODE
(005)
ACCOUNT CODE
(005)123456789012
SETTING INDIVIDUAL FORWARD
NO ANSWER TIMERS
Each station can have an individual Forward No Answer timer to accommodate
station users with different individual work habits. When adjusting this timer,
take care that the value is not greater than the transfer recall timer. The range is
–
000
250 seconds.
Open customer programming and follow the instructions below.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
SPK/RLS - Save data and advance to next program.
ACTION
1. Press TRSF and then dial 502
Display shows
2. Dial the station number (e.g., 205) OR
press UP or DOWN key to select the
station and press the right soft key OR
press ANS/RLS to select all stations
and press the right soft key
3. Enter the new value via the dial pad,
e.g., 020 (must be three digits) and the
system will return to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
DISPLAY
[201] FWD NO ANS
010 SEC _
[205] NO ANS FWD
010 SEC _
OR
[ALL] NO ANS FWD
SEC _
[205] NO ANS FWD
010 SEC 020
29
Advertisement
Table of Contents
